asie's personal wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== WS Flash Masta (WS/WSC) programming ======

The flashcart uses (rev4) or emulates (rev5+) a 2003 mapper. Most of its functionality
(banking, flash access via SRAM) is provided.

  * JS28F00AM29EWHA (1Gbit NOR flash, accessible as 16 64Mbit slots)
  * 4Mbit SRAM

===== AVR wake/sleep =====

AVR wake/sleep is controlled using 2003 GPIO bit 3.

To wake up the AVR:

  * port 0xCD = 0x08
  * port 0xCC = 0x08
  * port 0xCD = 0x00

One should wait around 12 ms (maybe less?) after sending this signal to ensure the AVR is awake.

To put the AVR to sleep:

  * port 0xCD = 0x08
  * port 0xCC = 0x00

===== RTC extensions =====

The flashcart uses invalid RTC date/time values to provide custom commands. For this to work, the AVR must be awake (see above).

==== Set slot ====

Format: RTC command 0x14 with parameters ''[0xA1, slot, 0, 0, 0, 0, 0, 0]''.

Description: Configure the visible slot, from 0 to 15.